From The Mana World
Revision as of 09:13, 19 December 2012 by Nard (talk | contribs)

Outdated template, please use Template:Status Under Construction to mark pages as unfinished. Template:Status outdated

This article has the following gaps: Needs to be updated with Thread 13653 and Thread 13672, which are generally accepted but there might be more discussion

This is an attempt to standardize the eAthena coding. Any suggestions are welcome to be posted on the discussion page before editing.

Code Formatting

Indentation

  • Code is indented with four spaces.
  • Code in the same block should have the same indentation.
  • Labels have no indentation.
  • Menu options are on their own lines and are indented further.
  • When using an if-statement, there should be a line break after the condition and the conditional command should be indented further.

Code Blocks

  • Code blocks should be separated from the others in a dinstinct way: insert a blank line between code blocks.
  • Individual blocks should be together No blank lines within a block.
  • The opening brackets should be at the end of the parent line, not in a new line; the closing ones should be in a line of their own.
  • newline between if (condition) and conditional_command, except when conditional_command is a goto at the beginning of a major script block (usually only at the beginning of a script), in which case if there are multiple if statements on adjacent lines, the gotos shall be aligned

provide an example

Remove unnecessary next; Remove redundant code such as end; after close; remove break; instead use end; (requires changing the java converter) Replace monsters.txt with _mobs.txt except in special cases. A standard for whitespace and comments.

    ?
   limit line length? (break long strings using + concatentation)

Labels and Subfunctions

  • newline before every label
  • no newline after a label
  • Labels should always start with L_, except those that act as a subfunction, which should start with S_. There must not be a fallthrough or goto to a subfunction label.

decision pending

L_CamelCase: Current practice for labels and I don't think that is worth changing,
L_lower_case:, o11c prefers, especially for things like L_close:
  • Subfunctions:to be discussed
"[...]except those that act as a subfunction, which should start with S_"
Also, what should labels within a subfunction label use? I was thinking LS_ or SL_; loratay currently uses L_SUB_ ... or perhaps this should be refactored out into a standalone function?
summary: S_, LS_, SL_, L_SUB_, Sub_, refactor out into a standalone function.

Comments

to be discussed

  • o11c suggests:
"^///" lines for documentation
"^// " lines to be commented out code (because that is what my editor uses automatically to disable code)
"^//[^ /]" for "other". 
Documentation should maybe have doxygen-like tags?
Dislikes boxed comments.
  • Actual
// Yellow dog quests
// author: Saturn
// see bluesageConfig for detailed quest description
// NPC Arthur will not make the code for you...
// uses global vars ... f
// calls  global function  funkbeat () located at ... f
//#################################################################################
//# bla blabla - By Smith, reviewed by john                                       #
//# GPL v.2                                                                       #
//#  ...                                                                          #
//#################################################################################

Variables

Document Variables

in every file, document every variable as one of:

  • account variable (prefix #) (note that there are also ## variable but they don't work in the stable version of the server;)
  • permanent player variable (no prefix)
  • temporary player variable (prefix @) - used after the script close;s or end;s.
  • dynamic player variable (prefix @) - passed into or out of callsub or callfunc
  • lexical (local) player variable (prefix @) - used only within the function (scripthelp.txt documents that ".@" means this but I don't know if that works)
  • local constant (prefix @) - not dependent on the player, used only within the function. e.g. lots of @QUEST_FOO_{SHIFT,MASK}
  • global permanent variable (prefix $) (I'm not sure if we have any of these right now)
  • npc permanent variable (prefix $) same as above but only used by one NPC
  • global temporary variable (prefix $@)
  • npc temporary variable (prefix $@) same as above but only used by one NPC, scripthelp.txt mentions prefix "." but I don't know if that works
  • special variable (in db/const.txt with a 1 following)
  • global constant (in const.txt)

If we use a consistent method of documenting these, we can then generate a list of all variables by type.

Variables initialization

Check for troublesome arrays: A troublesome array is defined as an array that is not

  • initialized all at once
  • initialized by appending elements to the end, for use in a menu
Nothing needs to be done, merely document them. I want this information at hand when I design the new scripting language to minimize conversion pains.
I wouldn't be surprised if there were no troublesome arrays at all. If there are only a couple it might be worth refactoring the code to remove them, but that might be a  high-level decision which is beyond the scope of this proposal.

Set dynamic and local @variables to 0 before close;

Naming Variables

Using as little variables as you need

So there are some quests, which require lots of variables. Think of monster oil quest, Oric and Warum quest etc.

This can often be done by bitmasking: One variable has 32 bits. So a variabe can store 2^32 different numbers: 4294967296

But sometimes you only need numbers from 0 to 15, but more of these variables. but numbers in range 0 to 15 can be stored in 4 bits ( 2^4 = 16 different numbers)

Here is an example how to use bitmasking: Media:Tester.txt

Defining Map Objects

These sections describe how to define map objects.

Warp Definitions

Warps are what move players between maps. They can also be used to move players around a single map, if needed. Warps are defined like this:

map1,startX,startY|warp|name|width,height,map2,endX,endY

Key:

map1 the starting map
startX the x-coordinate of the starting warp tile
startY the y-coordinate of the starting warp tile
name the name of the warp, unused but must be defined
width the width of the warp
height the height of the warp
map2 the ending map
endX the x-coordinate of the tile the player will end up on
endY the y-coordinate of the tile the player will end up on

Width and height are described in detail here: Warp Details.

Monster Definitions

Monsters are defined like this:

map,x,y,width,height|monster|name|mobID,count,spawn1,spawn2,event
map the map the monsters should appear on
x the x-coordinate of the spawn tile
y the y-coordinate of the spawn tile
width the tile width of the spawn area
height the tile height of the spawn area
name the name of the mob, unused but must be defined
mobID the mob identifier of the desired monster (in the monster db)
count the number to spawn
spawn1 the minimum delay between successive spawns (per individual)
spawn2 the minimum delay between death and respawn (per individual)
event the script event to fire upon death

A detailed description of position and area can be found here: Mob Details.

NPC Definitions

<map name>,<x>,<y>,<facing>|script|<NPC Name>|<sprite id>,{<code>}
<map name>,<x>,<y>,<facing>|script|<NPC Name>|<sprite id>,<triggerX>,<triggerY>,{<code>}

<facing> is always 0 in TMW NPC definitions are stored as (tmwa-server-data/)world/map/npc/<map name>/<NPC Name>.txt

Script Functions

function|script|<function name>|{<code>}

Actual script functions are stored or imported in the files (tmwa-server-data/)world/map/npc/functions/<function name>.txt, regardless rhey are called from a Map, NPC, Mob or item: tmwa-server-data/world/map/npc/scripts.conf The file tmwa-server-data/world/map/npc/_import.txt imports all NPC scripts wich are stored under the respective map name folders, usually under NPC name.

Examples

Open a chest and get reward

An example is given by a quest to get a key for a chest (in fact 3 keys):

// A treasure chest. You need three keys to open it.
//
// TMW_Quest (document variable here)
//

002-4.gat,93,37,0|script|Treasure|111,{

    if (TMW_Quest >= 38) goto L_Finished;

    mes "There is a chest here.";
    mes "Do you want to try to open it?";
    next;
    menu
        "Yes.", L_Yes,
        "No.", -;
    close;

L_Yes:
    if(countitem("TreasureKey") < 3) goto L_Not_Enough;
    getinventorylist;
    if (@inventorylist_count == 100 && countitem("TreasureKey") > 3) goto L_TooMany;
    mes "You opened the chest and found a short bow!";
    delitem "TreasureKey", 3;
    getitem "ShortBow", 1;
    set TMW_Quest, 38;
    close;

L_Not_Enough:
    mes "It seems that you do not have the right key for this chest yet...";
    close;

L_Finished:
    mes "You have already opened this chest.";
    close;

L_TooMany:
    mes "You do not have enough room to loot this chest. Maybe you should try again later.";
    close;
}

This script starts with describing the NPC (the chest, NPC sprite 111) and its location (map 002-4 X=93, Y=37, in tiles from top left of the map). Then follows what happens on activation: First, the variable "TMW_Quest" is checked to know if the player already accomplished the quest (the variable should be documented), If he has the script continues at label L_Finished, the player is reminded fe alredy accomplished the task and script finishes, if not the scrip continues. A message is shown (mes), then an option dialog (menu) is displayed with two possible answers : "Yes." or "No.". If the player answers "No." the script stops (close;); if he answers "Yes." the script continues at label L_Yes. Now player is checked to know if he has at least 3 keys, if not script branches to label L_Not_Enough tells the player he "has not the right key" and script closes. If he has keys enough, his inventory list is retrieved by the built-in function "getinventorylist" and it's content is checked to know if the player will have room enough to store the reward after the 3 keys use. If not, script goes to label L_TooMany and script close after a warning message, If yes 3 keys are deleted in player's inventory, he gets the reward: a Short Bow and the variable TMW_Quest is set to 38.

For more examples of the current system, check out the current scripts in use by the server. Beware though, this could affect your enjoyment of the game as it does spoil some of the mystery. Here's a link to git so you can view them in your browser:

https://github.com/themanaworld/tmwa-server-data/tree/master/world/map/npc

Note that anything said by an NPC should be put in double quotes ("). You can do that like this: "\"Hello!\" she said."

References